For white adhesive films, spray the surface and the adhesive side of the film with a mild soapy water mixture (2 drops of dish soap per 1 liter of water) and position the film as desired. Use a squeegee or a soft cloth to push the water out from the center toward the edges. Any air bubbles can be pricked with a needle.
Installation Instructions for Adhesive Film - Wet Method (PDF)
For clear adhesive films, we recommend using the dry application method. In this method, use strips of tape to mark the exact placement. Then, peel back about 2-3 cm of the backing paper on one side and fold it over. Press this part firmly in place. Gradually remove the backing paper piece by piece and use a squeegee to press down each section.
Installation Instructions for Adhesive Film - Dry Method (PDF)